Up

rFactor 2

Here you can find applications about rFactor 2 game!

myGrid@gpvwc.com (race start grid editor)
Date:
19 November 2018

This software was created by request of gpvwc.com administrators so that to avoid time delay after qualifying sessions by automatically creating the required batch file for race start ups and downs.

The program is installed (simple copy) at rfactor 2 game root folder on server.

The user can do the following:

  • Load the latest session logs and select which one will use for initial race grid.
  • Display the drivers with the order that they finished the session, should normally be the latest Qualifying or Race session if there are more than one races.
  • Add grid penalty and reverse the grid
  • Add an other driver or remove one of the existing drivers
  • Manually change positions up & down
  • Create the appropriate batch that will bring the desired grid positions in the next race session.

 

project_rF2 (realtime telemetry software)
File Size:
9.54 MB
Date:
19 November 2018

Few words about the application:

* Its a realtime telemetry software that sends vehicle telemetry & session's scoring data to a remote PC through INTERNET or ETHERNET.

* The data receiver (rfactor 2 user or not) can have all the data available with many different sets of tools.

* All the info are processed and displayed usually within a second.

* The user have access to simple vehicle data like tire pressures or advanced calculated race strategy info like laps to go regarding fuel and tires wear.

* Can save telemetry as .csv (per drive/lap/session)

I added some in action screen shots so that everyone can see what it is and how it works:

1) A screen shot while setting up the environment.
Includes a 1024x768 window of rfactor 2, manager's and driver's application ready to link (its spectator's mode but same goes for normal use without using driver's application of course)
Before action starts

2) Qualifying action
--> The rF2 window on the top right leaves enough room for many modules.
--> "GPS" module to show vehicles' positions
--> "Race info+" module to show session info
--> "Timing+" module to show selected driver's timing
--> "Live timing" module to show full grid timing info
--> "Session timing" module to show per stint timing

Qualifying action

3) Race action.
* Usually in races i need more modules especially when getting driver telemetry hence reducing the game window to 800x600 is sometimes required. This one is still 1024x768 cause its spectator's mode and i dont get telemetry data which has a big module.
* The "Timing+" module is replaced by the myPitwall module which allows the user follows driver's pace-gap per sector compared to front and behind drivers.
* The "Live timing" module is always needed. I usually lengthen the Pits area so i can check the Pit's status (see driver P17)
* In this setup there is enough room even for TeamSpeak at the bottom right corner.

Race action


Synoptical race tool

Here is a compllete manual for the application !

 

 
 
Powered by Phoca Download
Free Web Hosting